Source | Aitiip Technology Center

Aitiip Technology Center (Zaragoza, Spain) is researching the synthesis of chemical additives that respond to thermal stimuli to facilitate the decomposition of thermoset resin in controlled chemical reactors. This process seeks to enable separation of the fibers — usually glass or carbon fiber — from the rest of the resin and the reuse of both components, as demonstrated in the VIBES research project.
Thermoset resins, true to their name, are difficult to recycle due to their irreversible nature and resistance to thermal degradation. To target these challenges, Aitiip, participating in the IPPT_TWINN project led by the University of Slovenia’s (Ljubljana) Polymer Technology faculty, is helping to develop smart magnetic nanoparticles, which have been subjected to a magnetic field. These particles are integrated into a thermoset resin before curing. When it is time to recycle the material, a magnetic field can be applied; this induces a controlled breakdown of the polymeric network, facilitating the separation of the fibers from the rest of the material.
This breakdown of the material’s chemical structure then serves as a pre-treatment to facilitate chemical solvolysis, enabling more rapid decomposition of the resin, thus also speeding up the recycling process and reducing waste.
Characterization tests are currently underway to assess the impact on the resin system’s properties. Next steps also include determining whether these particles can further improve the efficiency of the chemical solvolysis process.
Note: Dr. Klementina Pusnik, a faculty member of the Polymer Technology and an expert in nanomaterials, has been instrumental in the design and synthesis of these nanoparticles. Her research stay at Aitiip has enabled the successful integration of the magnetic particles into epoxy resins.
Related Content
Plant tour: Joby Aviation, Marina, Calif., U.S.
As the advanced air mobility market begins to take shape, market leader Joby Aviation works to industrialize composites manufacturing for its first-generation, composites-intensive, all-electric air taxi.
The making of carbon fiber
A look at the process by which precursor becomes carbon fiber through a careful (and mostly proprietary) manipulation of temperature and tension.
Sulapac introduces Sulapac Flow 1.7 to replace PLA, ABS and PP in FDM, FGF
Available as filament and granules for extrusion, new wood composite matches properties yet is compostable, eliminates microplastics and reduces carbon footprint.